Samsung SNB-6005, User Manual, Page: 76 / 158

setup screen
76_ setup screen
to Set Day/night
1.
Select < Day/night >.
2. Select each item and set it properly.
• Mode : Mode is used to adjust the
color of Color or Black and White.
- Color : The video is always output in
color.
- B/W : The video is always output in
black and white.
- Auto : Normally, it is set to Color but
to B&W under low luminance at night.
`
If AGC of the < Exposure > menu is set to < Off >, the day/night mode cannot be set to < Auto >.
- External : It controls the color of the video when the alarm input terminal is
synchronized with an external device.
- Schedule : Set the time during which the camera is operated in the color mode.
• Dwell Time : It specifies the period for which the selected brightness condition
must be maintained to switch the lighting mode from Day to Night or vice versa.
• Duration : It specifies the interval of lighting mode conversion.
• Alarm in : The video is set to Color or B/W as the alarm sensor is open or closed.
`
If the Day/Night mode is set to External Input, the alarm input function of the Event-Alarm Input
page is disabled.
• Simple focus after D/N: The video is automatically focused after the lighting mode
changes from Day to Night or vice versa.
• Activation time(Color) : It specifies the schedule for color mode operation.
`
If it is set, the Color mode is maintained from 00 second of the starting time to 59 second of the
ending time.
M `
When < Simple focus after D/N > is set, the focusing function may not work properly under a
certain condition.
For more details, refer to “ Focus setup ”. (Page 80)
J
`
The Day/Night mode may not operate properly if the lens installed in the camera and the lens set
in < Lens > of the < Exposure > menu don’t match.
`
If you switch the day/night mode, the MD/VA event cannot be detected.