manualshive.com logo in svg

Samsung SNB-6005, User Manual, Page: 24 / 158

Share
Download
Samsung SNB-6005 User Manual Download Page 24

installation & connection

24_

 installation & connection

3. 

Check the specifications for audio input.

 

•

audio codec

 - Audio In : G.711 PCM (Bit Rate: 64kbps / Sampling Frequency: 8kHz), G.726 

ADPCM (Bit Rate: 16Kbps, 24Kbps, 32Kbps, 40Kbps / Sampling Frequency: 8kHz)

 - Audio Out : G.711 PCM (Bit Rate: 64kbps / Sampling Frequency: 8kHz)

 

•

full duplex audio

 

•

audio in

 : Mono signal line input (Max.2.4 Vpp)

 

•

audio out

 : Mono signal line output (Max.2.4 Vpp)

 

•

Line out impedance 

: 600Ω

connecting to the i/o port box 

Connect the Alarm I/O signal to the corresponding port of the rear port box.

 

•

ALARM IN : Used to connect the alarm input sensor or external day/night sensor.

 

•

ALARM OUT : Used to connect the alarm output signal.

 

•

GND : Used for earth-grounding.

 

•

RS-485+ : Communication port for RS-485 receiver (+).

 

•

RS-485- : Communication port for RS-485 receiver (–).

Summary of Contents for SNB-6005































































































































































Reviews:

No comments