manualshive.com logo in svg

Samsung SNB-6005, User Manual, Page: 15 / 158

Share
Download
Samsung SNB-6005 User Manual Download Page 15

English 

_15

●

  

over

view

Item

Description

e

Lightning protective 

grounding port

Used to discharge the lightning current safely outside in order to protect the 

camera.

f

Power Port

Used to plug the power cable.

g

Network Port

Used to connect the PoE or Ethernet cable for network connection.

h

Alarm I/O Port

ALARM IN

Used to connect the alarm input sensor or external day/

night sensor.

ALARM OUT

Used to connect the alarm output signal.

GND

Used for earth-grounding.

RS-485+

RS-485 Data line

RS-485-

RS-485 Data line

i

Test Monitor Out

Output port for test monitoring the video output. Use the test monitor cable 

to connect to a mobile display and check the test video.

j

SD, Power Indicators

SD

ON : A memory card is inserted and operates normally.
Flashing :  Failed to record, insufficient space, or inserted 

abnormally.

OFF :  Camera is off, camera is restarting, memory card is 

not in place, or when record is off.

POWER

ON : While the power is on
OFF : If the power is off

 

J

 

`

RS-485 port only supports direct connection with pan/tilt driver and external connections of the 

RS-485 controller is not supported.

Summary of Contents for SNB-6005































































































































































Reviews:

No comments