manualshive.com logo in svg

Samsung SNB-6005, User Manual, Page: 11 / 158

Share
Download
Samsung SNB-6005 User Manual Download Page 11

English 

_11

●

  

over

view

recommenDeD micro SD/SDHc/SDXc memory carD 

SpecificationS

 

•

Recommended capacity : 4GB ~ 64GB

 

•

For your camera, we recommend you use a memory card from the following 

manufacturers: 

Micro SD/SDHC/SDXC Memory Card : Sandisk, Transcend

 

•

For the framerate below 30 fps, it is recommended to use the specification memory card 

of Class 6 or higher.

 

•

For the framerate over 31 fps, it is recommended to use the specification memory card of 

Class 10 + UHS-1 or higher.

naS recommenDeD SpecS

 

•

Recommended capacity : 200GB or higher is recommended.

 

•

Simultaneous access : One unit of NAS can accept a maximum of sixteen camera 

accesses.

 

•

For this camera, you are recommended to use a NAS with the following manufacturer’s 

specs.

Recommended products 

Available sizes

Netgear NAS 

A maximum of 16 cameras can access simultaneously.

Synology NAS 

A maximum of 16 cameras can access simultaneously.

 

J

 

`

When you use Netgear’s NAS equipment, do not allocate the capacity for use.

 

`

If you use NAS equipment for purposes other than video saving, the number of accessible 

cameras may be reduced.

Summary of Contents for SNB-6005































































































































































Reviews:

No comments