Samsung SNB-6005 User Manual Download Page 104

Page: 104 / 158

Specify an operation that will perform if an alarm occurs.

•

FTP : Specify the use of FTP transfer in the alarm input setup.

Refer to “

FTP / E-mail

” for more details. (page 93)

•

E-mail : Specify the use of email transfer in the alarm input setup.

Refer to “

FTP / E-mail

” for more details. (page 93)

•

Record : You can set up the alarm to record to a Micro SD card or an NAS when

operating.

Set <

Device

> to <

> in <

Storage

>. (page 95)

•

Alarm output : Select whether to set the alarm output if an alarm is incoming, and

specify the alarm output time.

•

Goto preset : Moves to the specified preset location when setting the alarm input.

Only if the camera pan/tilt receiver is installed, Goto preset is available.

When done, click [

apply (

)

setup screen

104_

setup screen

Summary of Contents for SNB-6005































































































































































Search results

Summary of Contents for SNB-6005

Reviews:

Samsung SNB-6005, User Manual, Page: 104 / 158

Search results

Summary of Contents for SNB-6005

Reviews: