Samsung SNB-600 User Manual Download Page 9

Page: 9 / 174

English

●

OVER

VIEW

PRODUCT FEATURES

•

Full HD Video Quality

•

Multi-Streaming

This network camera can display videos in different resolutions and qualities
simultaneously using different CODECs.

•

Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

•

Alarm

When an event occurs, video is either sent to the email address registered by the user, sent
to the FTP server, saved in a Micro SD card or NAS, or a signal is sent to the alert output
terminal.

•

Tampering Detection

Detects tempering attempts on video monitoring.

•

Motion Detection

Detects motion from the camera’s video input.

•

Intelligent Video Analysis

Analyzes video to detect logical events of specified conditions from the camera’s video
input.

•

Face Detection

Detects faces from the camera’s video input.

•

Audio Detection

Detects sound louder than a certain level specified by user.

•

Smart Codec

Adaptively applies codecs for a portion of the camera’s field of view to improve the quality
of such area specified by user.

•

Auto Detection of Disconnected Network

Detects network disconnection before triggering an event.

•

ONVIF Compliance

This product supports ONVIF Profile-S.
For more information, refer to www.onvif.org.

Summary of Contents for SNB-600















































































































































































Search results

Summary of Contents for SNB-600

Reviews:

Samsung SNB-600, User Manual, Page: 9 / 174

Search results

Summary of Contents for SNB-600

Reviews: