setup screen
To Set Day/Night (SNB-6004)
1.
Select <
Day/Night
>.
2.
Select each item and set it properly.
•
Mode: Mode is used to adjust the
color of Color or Black and White.
- Color : The video is always output in
color.
- B/W : The video is always output in
black and white.
- Auto : Normally, it is set to Color but
to B&W under low luminance at night.
`
If AGC of the <
Exposure
> menu is set
to <
Off
>, the day/night mode cannot be set to <
Auto
>.
- External : It controls the color of the video when the alarm input terminal is
synchronized with an external device.
- Schedule : Set the time during which the camera is operated in the color mode.
•
Dwell Time : It specifies the period for which the selected brightness condition
must be maintained to switch the lighting mode from Day to Night or vice versa.
•
Duration : It specifies the interval of lighting mode conversion.
•
Alarm in : The video is set to Color or B/W as the alarm sensor is open or closed.
`
If the Day/Night mode is set to External Input, the alarm input function of the Event-Alarm Input
page is disabled.
•
Simple focus after D/N: The video is automatically focused after the lighting mode
changes from Day to Night or vice versa.
•
Activation time(Color) : It specifies the schedule for color mode operation.
`
If it is set, the Color mode is maintained from 00 second of the starting time to 59 second of the
ending time.
M
`
When <
Simple focus after D/N
> is set, the focusing function may not work properly under a
certain condition.
For more details, refer to “
Focus setup
”. (Page 92)
J
`
The Day/Night mode may not operate properly if the lens installed in the camera and the lens set
in <
Lens
> of the <
Exposure
> menu don’t match.
88_
setup screen