Samsung SNB-600 User Manual Download Page 39

Page: 39 / 174

English

_39

●

INST

ALLA

TION & CONNECTION

Connecting an external RS-485 device (SNB-6003/SNB-6004)

Connect the camera with an external device using the [

RS-485 +, -

] ports.

You can control the pan/tilt operations of the camera via RS-485 communications.

The GND connection is recommended for RS-485 communications. If you encounter a communication
failure, connect the GND pin as appropriate to correct the GND level between camera and external device.

Connecting to the I/O port box (SND-6083/SND-6084)

Connect the Alarm I/O cable to the corresponding port of the inner port box.

•

ALARM OUT : Used to connect the alarm output signal.

•

ALARM IN : Used to connect the alarm input sensor or external day/night sensor.

•

GND : Used for earth-grounding.

To connect the external sensor

Connect one strand of each signal line (2-strand) of the sensors to the [

ALARM IN

] port,

and connect the other strand to the [

GND

] port.

Alarm In Wiring Diagram

Sensor

GND

RESISTOR

ALARM IN (5mA SINK)

RESISTOR

VCC_3.3V

DIODE

GND

MLCC

TRANSISTOR

External

connection

Inside of the camera

Alarm

Sensor

Summary of Contents for SNB-600















































































































































































Search results

Summary of Contents for SNB-600

Reviews:

Samsung SNB-600, User Manual, Page: 39 / 174

Search results

Summary of Contents for SNB-600

Reviews: