7.
Specify an operation that will perform if an alarm occurs.
•
FTP : Specify the use of FTP transfer in the alarm input setup.
•
E-mail : Specify the use of email transfer in the alarm input setup.
•
Record : Specify the use of recording in the alarm input setup.
•
Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
•
Goto preset : Moves to the specified preset location when setting the alarm input.
`
Only for SNB-6003/SNB-6004.
`
Only if the camera pan/tilt receiver is installed, Goto preset is available.
8.
When done, click [
Apply (
)
].
Time schedule
You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Event setup
>.
3.
Select <
Time schedule
> from <
Event
action setup
>.
4.
Set whether or not to <
Enable
>.
5.
Specify the <
Transfer interval
>.
6.
Specify the activation time and
activation condition.
`
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”.
(page 116)
J
`
The transfer interval setting value must be
smaller than the preset activation interval to succeed in image transmission.
7.
When done, click [
Apply (
)
].
English
_117
●
SETUP SCREEN