Samsung SNB-5003 User Manual Download Page 9

Page: 9 / 160

English

●

over

view

proDuct featureS

•

HD video Quality

•

multi-Streaming

This network camera can display videos in different resolutions and qualities

simultaneously using different CODECs.

•

web Browser-based monitoring

Using the Internet web browser to display the image in a local network environment.

•

alarm

If an event occurs, the event-related video will be transferred to the FTP/email specified

by the user or saved to the Micro SD memory, or the event signal will be sent to the Alarm

Out port.

•

tampering Detection

Detects tempering attempts on video monitoring.

•

motion Detection

Detects motion from the camera’s video input.

•

intelligent video analysis

Analyzes video to detect logical events of specified conditions from the camera’s video

input.

•

face Detection

Detects faces from the camera’s video input.

•

audio Detection

Detects sound louder than a certain level specified by user.

•

auto Detection of Disconnected network

Detects network disconnection before triggering an event.

•

onvif compliance

This product supports ONVIF Profile-S.

For more information, refer to www.onvif.org.

Summary of Contents for SNB-5003

































































































































































Search results

Summary of Contents for SNB-5003

Reviews:

Samsung SNB-5003, User Manual, Page: 9 / 160

Search results

Summary of Contents for SNB-5003

Reviews: