installation & connection
28_
installation & connection
installation
1.
Attach the installation template to the
selected area and punch 3 holes as shown in
the figure.
2.
Use the 2 supplied screws to fix the camera
to the 2 punched holes.
`
Set the <
FRONT TOP
> mark imprinted on the
camera to face the direction of camera monitoring.
3.
Connect the camera internal terminal with the
corresponding cable.
4.
Refer to “
adjusting the monitoring direction
for the camera
” to adjust the lens in a desired
direction. (page 29)
5.
Fasten the dome case (dome cover + camera
case) to the main body as shown in the figure.
J
`
Pay attention to the direction for assembly.
FRONT
TOP
DC 12V
1 2 3
1. ALARM OUT
2. ALARM IN
3. GND
VI
DE
O
RE
SE
T
T
F
W
N
AF
+-