manualshive.com logo in svg

Samsung SNB-5001, User Manual, Page: 67 / 92

Share
Download
Samsung SNB-5001 User Manual Download Page 67

Profile access

You can check the profile information.

1. 

From the Setup menu, select the 
<

System ( 

 )

> tab.

2. 

Click <

Profile access

>.

 

•

Profile access : Show the information 
of the newly added profile.

 

- Profile : Show the information of the 

newly added codec.

 

- Bitrate(kbps) : Show both the actual 

bit rate and the set bit rate.

 

- Framerate(fps) : Show both the actual frame rate and the set frame rate.

 

- ATC(%) : Show the ATC status.

 

- Concurrent users count : Show the number of concurrent users who access the 

profile.

 

•

Current users : Show the information of all users who access the camera.

 

- Profile : Show the name of the profile accessed by the user.

 

- IP address : Show the IP address of the current user.

 

- Bitrate(kbps) : Show the current bit rate.

 

- Network connection status : You can check the network connection status.

English 

_67

●

  

SETUP SCREEN

Summary of Contents for SNB-5001





























































































Reviews:

No comments