manualshive.com logo in svg

Samsung SNB-5001, User Manual, Page: 43 / 92

Share
Download
Samsung SNB-5001 User Manual Download Page 43

BLC Setup

You can specify a desired area on the video manually and set the area to be displayed 
more clearly.

1. 

Select <

Backlight

>.

2. 

Set <

Mode

> to <

BLC

>.

3. 

Set <

BLC level

>.

You can change the level to adjust the 
brightness of the monitoring area.

4. 

Set the <

Top, Bottom, Left, Right

> 

levels to specify the target area.

Exposure Setup

You can adjust the exposure level of the camera.

1. 

Select <

Exposure

>.

2. 

Select each item and set it properly.

 

•

Brightness : Adjust the screen 
brightness.

 

•

Iris : Adjust the iris of the camera 
manually or automatically.

 

- Auto : Depending on the settings, 

such as brightness and shutter 
speed, the iris will be adjusted.

 

- Manual : Fix to Full Open.

 

For a camera with the shutter type of AUTO, the iris will operate properly only if it is set to 
<

Manual

>.

 

•

Shutter mode : Adjust the electronic shutter of the camera.

 

- Auto : Adjust the shutter speed automatically according to the ambient brightness.

 

- Manual : Adjust the shutter speed of the camera manually.

 

- A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due 

to a frequency mismatch with the ambient lighting.

 

•

Shutter speed : Control the shutter speed manually.

 

•

SSNR : Specify the reduction level of background noise for a low contrast scene.

English 

_43

●

  

SETUP SCREEN

Summary of Contents for SNB-5001





























































































Reviews:

No comments