to use motion detection
It detects a motion that meets all conditions specified by sensitivity, size and area.
1.
Select a motion detection mode.
2.
Select <
Sensitivity
> tab to set the
sensitivity level. You can set the sensor’s
sensitivity to detect a motion out of the
background from the monitoring video.
J
`
In a situation that definitely distinguishes
objects out of backgrounds, set this to
a low sensitivity level. For opposite case
that is hard to distinguish objects like low
illuminated situation, set this to a high
level.
3.
Select <
Size
> tab.
You can limit the minimum/maximum
size of motion to be detected.
J
`
Motions smaller than the specified
minimum size or bigger than the
maximum size are not detected. To avoid
unintended detections caused by great
and small noises, set minimum/maximum
motion sizes appropriately in accordance
to your environments.
Note that same motions on the same location can be differently detected in their detection size;
it is recommended to consider and include the tolerable difference when setting the minimum/
maximum detection sizes.
English
_87
●
Setup
Screen
Summary of Contents for SNB-1001
Page 1: ...NETWORK CAMERA User Manual SNB 1001 SND 1080 SNV 1080 ...
Page 102: ...appendix Product Overview Unit mm inch SNB 1001 74 3 2 93 114 4 4 50 54 5 2 15 102_ appendix ...
Page 103: ...SND 1080 Ø115 8 4 56 115 8 4 56 42 4 1 67 92 7 3 65 English _103 appendix ...
Page 104: ...appendix SNV 1080 Ø137 0 5 39 Ø100 0 3 94 105 9 4 17 104_ appendix ...