manualshive.com logo in svg

Samsung SNB-1001, User Manual, Page: 21 / 130

Share
Download
Samsung SNB-1001 User Manual Download Page 21

English 

_21

●

  

over

view

components

Item

Description

a

Reset Button

Resets the camera settings to the default. 

Press and hold for about 5 seconds to reboot the system.

J

 

If you reset the camera, the network settings will be adjusted so that  

  DHCP can be enabled. If there is no DHCP server in the network, you  

  must run the IP Installer program to change the basic network settings  

  such as IP address, Subnet mask, Gateway, etc., before you can  

  connect to the network.

b

Micro SD Memory 

Card Compartment

Compartment for the Micro SD memory card.

c

Monitor Out

Using the test monitor cable, you can connect to a mobile display for camera 

test. (for installation)

d

Focus lever

Turn the barrel left or right to adjust the focus, and turn the knob clockwise 

to lock the focus.

e

ZOOM lever

Turn the barrel left or right to adjust the zoom, and turn the knob clockwise 

to lock the zoom.

RESET

RESET

VIDEO

OUT

Summary of Contents for SNB-1001



































































































































Reviews:

No comments