Samsung SMT-i5343 User Manual Download

Page: 194 / 201

192

ANNEX

Product Specifications

The features and specifications of the SMT-i5343 are as follows.

Item

Specifications

Model

SMT-i5343

Weight (kg)

1.445 Kg

± 5 % (Full Set; Unit Box included),

Single Piece: 1.147 Kg

± 5 %

Dimensions (mm)

223 (Width) × 223 (Depth) × 132 (Height)

LCD

Color Graphic LCD (480 × 272 Pixel)

Adaptor input power

AC 100-250 V/50-60 Hz, 1.0 A

Adaptor output power

DC 12 V; 2 A

PoE Input Power

DC 48 V (802.3af)

PoE Device

802.3 af standard support (For CLASS 3)

Operating conditions

Temperature: 0-45

°C, humidity: 10-90 %

Adapter Model

The adapter output power is DC 12V, 2A and the maker and the model are as
follows.

- WEIHAI SUNGHO ELECTRONICS CO LTD/SHA24S12-EU

- WEIHAI SUNGHO ELECTRONICS CO LTD/SHA24S12-GB

- WEIHAI SUNGHO ELECTRONICS CO LTD/SHA24S12-US

Class B Device (Broadcasting communication device for home use)

This device obtained EMC registration mainly for home use (Class B) and may be
used in all areas.

Caution: This wireless device is subject to electromagnetic interference.

Summary of Contents for SMT-i5343










































































































































































































Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands

Samsung SMT-i5343, User Manual

Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands