manualshive.com logo in svg

Samsung SmartCam SNH-E6411BN, User Manual, Page: 7 / 36

Share
Download
Samsung SmartCam SNH-E6411BN User Manual Download Page 7

7

01

Getting Started

power Supply

Plug-in the camera power adapter to the wall outlet and connect the camera as 

shown.

 

n

 

`

Make sure to use the provided power adaptor. If you use an adaptor other than the 

power supply adaptor provided in our package, the product may not operate properly.

 

`

It will take about 1min for the camera to boot-up completely.

 

`

When the camera has finished turning on, the LED lamp turns red and starts blinking.

network connection 

Connect the provided network cable with the network terminal of the camera.
For further details on network configuration, refer to “

network Connection and 

Settings

”. (Page 11)

LeD status 

LED indicator shows operational status with colors.
Refer to table below for detailed meaning of the LED indicator.

Color

Status

Red

Booting up

Red Blinking

Booting completed / Establishing network connection

Blue Blinking

Connecting to the network.

Blue

Local connection established

Green

Connection to server completed / Normal operation

Yellow

WiFi Direct is operating. 

Magenta

Updating firmware

Summary of Contents for SmartCam SNH-E6411BN





































Reviews:

No comments