Ver.
Smart MBS RRH-P4 Installation Manual/Ver.3.0
© SAMSUNG Electronics Co., Ltd.
E-5
2600-00CTEIGAA
4.0
E.3 Assembling Pressure Terminal
The procedures for assembling a pressure terminal to a cable are as follows:
Strip the Cable Sheath
Figure E.4 Stripping Cable Sheath (1)
4) Put a cable into a clamp, locate a blade on a marking position, and push it into the sheath.
5) Align the stripper to be perpendicular to the cable and rotate it more than two laps.
1) After checking the inside length of a pressure terminal, mark the cable.
2) Adjust the length of a cutter blade according to the sheath thickness of the cable.
3) Push the clamp with a thumb a ccording to the cable size to secure a space for the cable.