Getting Started
38
Customise a watch face with a photo
Apply a photo as your watch face after importing a photo from your mobile device. Refer to
Importing images from your mobile device
for more information about importing photos
from a mobile device.
1
Tap and hold the Watch screen and swipe the bezel or swipe to the left or right on the
screen, and then tap
Customise
of the
My Photo+
watch face.
2
Tap the screen and tap
Add photo
.
3
Select a photo to apply as a watch face and tap
OK
→
OK
.
You can zoom in or out of the photo by swiping the bezel. Alternatively, double-tap the
image, spread two fingers apart, or pinch an image. When the photo is zoomed in, swipe
the screen to make a part of the photo appear on the screen.
To add extra photos, swipe the bezel clockwise or swipe to the left on the screen and
select
Add photo
. Up to twenty photos can be added as the watch face. The photos
you add will rotate in a row.
4
Swipe the screen to change the colour or font and tap
OK
.
Activating the watch always on feature
You can set the screen to always display the time when the screen is turned off while you are
wearing your Galaxy Watch Active2.
On the quick panel, tap . Alternatively, on the Apps screen, tap (
Settings
)
→
Watch
faces
→
Watch always on
, and then tap the switch to activate it.
Watch only mode
You can use your Galaxy Watch Active2 in watch only mode. In watch only mode, only the
time will display and all other functions cannot be used.
On the quick panel, tap . Alternatively, on the Apps screen, tap (
Settings
) and tap
Battery
to open the battery management menu. Then select
Watch only
and tap
.
To deactivate watch only mode, press and hold the Home key for more than three seconds.
