![background image](http://html.mh-extra.com/html/samsung/sm-f926b/sm-f926b_service-manual_1191692014.webp)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document wi
thout Samsung’s written authorisation is strictly prohibited.
5. Disassembly and Assembly
5-2-2. SUB UB Remove
It is possible for the device or battery to be damaged by heat.
[Caution]
Be careful to not put your finger tips or foreign objects on the
Rear camera or Back cover lens ( ).
[Caution]
Be sure to remove any residual tape ( ) attached on the inside
of the back cover before reassembling the device.
Step 1
Heat the microwaveable Gel Pad.
[Caution]
- Follow the Gel Pad's instructions for heating.
(Correct temperature for use: 55-65 degrees Celsius.)
- Be careful not to damage the device through excessive heat.
(It is recommended to disassemble the device in an area with
temperature gauge.)
- Place the Power button so it is facing the outside of the Gel
Pad.
[Warning]
Do not place the device directly in to the microwave and heat
it.
Step 2
After additionally heating the Gel pad for 5 minutes, place the
suction cup in the centre of the SUB UB and lift upwards while
separating it with the Open pick.
[Caution]
- As the SUB UB can be damaged by excessive force, be
careful to not damage the Back cover.
Warning