![background image](http://html.mh-extra.com/html/samsung/sm-f926b/sm-f926b_service-manual_1191692013.webp)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document wi
thout Samsung’s written authorisation is strictly prohibited.
5. Disassembly and Assembly
5-2. Disassembly
5-2-1. Back Cover Remove
It is possible for the device or battery to be damaged by heat.
Step 1
Heat the microwaveable Gel Pad.
[Caution]
- Follow the Gel Pad's instructions for heating.
(Correct temperature for use: 55-65 degrees Celsius.)
- Be careful not to damage the device through excessive heat.
(It is recommended to disassemble the device in an area with
temperature gauge.)
- Place the Power button so it is facing the outside of the Gel
Pad.
[Warning]
Do not place the device directly in to the microwave and heat
it.
Step 2
Place the Open pick in the gap between the Back cover and
the Display module and increase the gap by pressing
up/down/left/right on all four sides.
[Caution]
- As the internal circuity can be damaged, do not insert the
Open pick too far.
Step 3
After additionally heating the Gel pad for 5 minutes, place the
suction cup in the centre of the Back cover and lift upwards
while separating it with the Open pick.
[Caution]
- As the Back cover can be damaged by excessive force, be
careful to not damage the Back cover.
Warning