COLOR DOME CAMERA
User Guide
16
COLOR DOME CAMERA
User Guide
17
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
7.IMAGE ADJ
8.SPECIAL
9.EXIT
Select the function by
moving up or down direction
of function setup switch.
Change the status by
moving right or left direction
of function setup switch.
DC : Select Auto Iris Lens
• When DC is selected, you can control screen
brightness. The range of brightness control is
between 1 and 70. Adjust the brightness
appropriately for optimal screen brightness.
1. When the SETUP menu screen is displayed, select
’EXPOSURE‘ by using the Function Setup switch so that
the arrow indicates ’EXPOSURE‘.
2. Select a desired mode using the Function Setup switch.
• An item with the
icon also has sub menus. To select a sub menu, select an item with the icon
and press the Function Setup switch.
• An item with the - - - icon is unavailable due to function settings.
Notes
Operating Your Camera
EXPOSURE
Using this function, you can control screen brightness.
1. When the SETUP menu screen is displayed, select ’LENS‘ by using the Function Setup
switch so that the arrow indicates ’LENS‘ .
SHUTTER : Because of using built-in dc lens, shutter speed is fixed at 1/60(PAL:1/50)
basically.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
LENS
MAIN SETUP
1.LENS
DC
2.EXPOSURE
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
• To produce better results with A.FLK, do not use it in conjunction with the WDR
mode of the BACKLIGHT menu.
Notes
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 30dB.
- HIGH : Allows automatic gain control from 5.3dB to 42dB.