COLOR DOME CAMERA
User Guide
18
COLOR DOME CAMERA
User Guide
19
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
SENS-UP :
When it is night or dark, the camera automatically detects the light level and
maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
※
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,800ºK and 10,500ºK.
INDOOR : Select this when the color temperature is between 4,500ºK and 8,500ºK.
OUTDOOR : Select this when the color temperature is between 1,800ºK and
10,500ºK. (sodium light inclusion)
AWC
→
SET : To find the optimal setting for the current luminance environment in this mode,
set the point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
MANUAL : Select this to fine-tune White Balance
manually. Set White Balance first by using the
ATW or AWC mode. After that switch to
MANUAL mode, fine-tune the White Balance
and then press the Function Setup switch.
Operating Your Camera
• If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x256)
• Note that the higher the zoom level, the brighter the screen, but the more likely it is
that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
Notes
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ’White Bal.‘ by using the Function
Setup switch so that the arrow indicates ’White Bal.‘ .
2. Select a desired mode using the Function Setup switch.
White Balance (White Bal.)
• White Balance may not work properly under the following conditions. In this case select the AWC
mode.
1
When the color temperature of environment surrounding the subject is out of the control range
(e.g. clear sky, or sunset)
2
When the ambient illumination of the subject is dim.
3
If the camera is directed towards a fluorescent light or is installed in a place where illumination
changes dramatically, the White Balance operation may become unstable.
Notes
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
This camera is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed,
select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates
‘BACKLIGHT‘.
2. Select a desired mode using the Function
Setup switch depending on the camera
purpose.
BACKLIGHT
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON