COLOR DOME CAMERA
User’s Manual
26
COLOR DOME CAMERA
User’s Manual
27
MOTION DET :
This product has a feature that allows you to observe
movement of objects in 8 different areas on the screen,
and the words 'MOTION DETECTED' appear on the
screen when movement is detected. You can monitor
activity more efficient.
Operating Your Camera
• MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the
monitor screen.
Notes
• When using AC power at 60Hz(PAL : 50Hz) frequency, you can use the L/L type synchron
ization.
• If the change the synchronization setting to "L/L" synchronization type when color
rolling appears, the frequency of the lamp and the camera power is synchronized to
remove the color rolling.
Notes
… …
When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates 'MOTION DET'.
… …
Set up the mode using the Function Setup switch.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL
→
SET : Fills in a selected MD area. The color of filling is sequentially selected as brown,
orange, blue, cyan, yellowish green, yellow, magenta and red.
- RETURN :
Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
Press the Function Setup switch in the EXIT menu to save the current settings and exit the
MAIN SETUP menu.
EXIT
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
LANGUAGE :
You can select the menu language according to your requirements.
RESET :
Resets the camera settings to the factory defaults. Language is not initialized.
RETURN :
Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu.
- AREA SEL : You can select up to 8 PRIVACY areas.
- AREA MODE : Determines whether to use the area selected
in the AREA SEL, and the size and position
of the area.
- MASK COLOR : Determine area color. You can select Gray,
Black and White
- TRANSP : Determine the transparency of selected area as
controlling number from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
PRIVACY : Hide an area you want to hide on the screen.
… … …
When the SPECIAL menu screen is displayed, press
the Function Setup switch so that the arrow
indicates ‘PRIVACY’.
… … …
Set up the mode using the Function Setup switch.
• The chance of resolution decrease is existed because DIS function uses the digital zoom.
• DIS doesn’t operate when background illumination is too low.
• DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
• If DIS is enabled, the digital zoom is not configured to less than 46 level.
Notes