COLOR CCD CAMERA
User’s Manual (SID-370)
38
COLOR CCD CAMERA
User’s Manual (SID-370)
39
➍
You can enter up to 20 characters.
a. Move the cursor to the character entry field moving left or right direction of
Function Setup Switch.
b. Use the 4 direction of Function Setup Switch to select a desired character.
c. Press the Function Setup Switch to confirm selection of the blinking character. The
character is then saved, and the cursor in the entry field moves to the next
position.
d. Repeat steps a through c until the desired name has been entered.
• Correcting Mistakes
Move the cursor th ‘CLR’ and press the Function Setup Switch to clear the entire entry. To
modify one character, use LEFT or RIGHT to position the cursor above the character to be
modified and click the Function Setup Switch after selecting the character to enter.
Notes
➎
Enter a title, move the cursor to ‘POS’ and press
the Function Setup Switch. The entered title appears
on the screen. Select the position to display the title
on the screen by moving the 4 direction of Function
Setup Switch and press the Function Setup Switch.
When the position is determined, select.
• CAM ID
: Displays camera ID on top left corner of the screen.
• CAM INFO
: Displays camera information on screen.
• MOTION ALARM : You can toggle the use of the camera alarm.
• ZOOM MAG
: Use th is feature to display the current zoom magnification level
on screen. Position the indicator over ‘ZOOM MAG’ moving up
or down direction of Function Setup Switch. Then set to ON
moving left or right direction of Function Setup Switch.
• LANGUAGE
: You ca n select the menu language according to your
requirements (Korean, ESPANOL, FRANCAIS, ITALIANO,
DEUTSCH, ENGLISH, Japanese, Chinese)
• END
: Select this to save the SPECIAL menu settings and return to the
SPECIAL menu.
FRONT DOOR
To reset your camera to factory default condition.
To finish setup menu.
RESET
EXIT
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.
• Nothing appears on the screen.
- Check that the power cord and line connection between the camera and monitor are
fixed properly.
- Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
• The image on the screen is dim.
- Is lens stained with dirt? Clean your lens with soft, clean cloth.
- Set the monitor to proper condition.
- If the camera is exposed to too strong light, change the camera position.
3
Press Function Setup Switch.
CAMERA TITLE SETUP
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0 1 2 3 4 5 6 7 8 9 ( )
< >-/#¬
S
!?,.
←→
CLR POS END
Operating Your Camera