48_
using the DVR
using the DVR
Screen Setup
Some monitors many not display information (camera name, icon, time information, etc.) about the DVR,
depending on the condition. Then, you can change the display position of the data.
In the <
Device
> window, press the up/down (
▲▼
) button
to move to <
Monitor
> and press the [
ENTER
] button.
Select the <
Monitor
> item.
Select <
Display Position Setup
> in the bottom.
You will move to the <
Display Position Setup
> window.
Use the four direction buttons or the number buttons on
the front panel or the remote control to adjust the data
position.
Setting the Spot Out
You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help easy setup.
Use the up/down buttons (
▲▼
) in <
Device
> window to
move to <
Monitor
>, and press [
ENTER
] button.
Select <
Spot Out
>.
Use direction buttons (
▲▼◄ ►
) to move to a desired
item, and set the value.
Spot Out1 : You can select between 16-, 9-, 4-split, Auto
Sequence, and Single.
Set Mode : A window for “
Set Spot Out
” appears and you
can set the channel for it.
You can set the dwell time between the screen switching in
“
Setting the Device
>
Camera
>
SEQ-Dwell Time
”.
(Page 42)
Event Display : Sets the duration for the Spot Out on an
event.
If selected <
OFF
>, an event will not output to the Spot Out.
You can setup using the mouse right button in Live screen.
Refer to “
Spot Out
”. (Page 31)
When the Spot Out is done, press <
OK
>.
3.
4.
5.
6.
3.
4.
5.
•
•
•
M
6.
Monitor
Spot Out
Monitor
Spot Out 1
16-split
Event Display
OFF
Mode
OK
Cancel
Set Mode
Set Mode
Set Mode
Set Mode
ALL
Monitor
Spot Out
Monitor
Spot Out 1
16-split
Event Display
OFF
Mode
OK
Cancel
Set Mode
Set Mode
Set Mode
Set Mode
ALL CH
CH 5,6,7,8
CH 9,10,11,12
CH 13,14,15,16
Set Spot Out
OK
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Display Position Setup
OK
Cancel
30
30
30
30