manualshive.com logo in svg

Samsung SHR-6080, User Manual, Page: 20 / 122

Share
Download
Samsung SHR-6080 User Manual Download Page 20

20_

 

connecting with other device

connecting with other device

Connecting to Internet through ADSL

CONNECTING THE USB

There are two USB ports at the front and one at the back of the product.

You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port.

If a USB HDD is connected to the system, recognition and settings are available in “

Menu

 > 

Setting the Device

 > 

Storage Device

”. (Page 44)

This product supports hot-plugging, which connects/removes the USB device during the system operation.

The USB type HDD must be set as Master.

If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.

CONNECTING POS DEVICE

You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with 
a RS-232C cable.

Connection setup for the RS-232C port is available in “

Menu

 > 

Device

 > 

POS Devices

”, press the 

<

POS Device Setup

> button and set <

Baud rate, Parity, Data, Stop bit and Transfer Type

>. (Page 46)

1.

2.

3.

4.

J


1.

2.

Hub/Switcher

Phone(ADSL) Line

ADSL MODEM

RJ-45 Ethernet Cable
(Direct Cable)

Windows

NET-i Pro

Summary of Contents for SHR-6080



























































































































Reviews:

No comments