manualshive.com logo in svg

Samsung SHR-6080, User Manual, Page: 17 / 122

Share
Download
Samsung SHR-6080 User Manual Download Page 17

English

 

_17

 INSTALLATION

When the installation of additional HDDs is done, 
insert the lower and upper brackets into the DVR 
and fi x them with the provided screws.

When the installation of additional HDDs is done, 
connect the power cable and connect the HDD 
signal cables (SATA Cable) to connectors   ~   on 
the main board.

You can check the HDD map directly on the DVR.
Refer to “

Storage Device

 > 

HDD Map

”. (Page 44)

Note that the order of the HDD data cable is nothing to do 
with the operation. Just make arrangements of the 
connectors considering the length of each connector.

SHR-6080, 6160 & 6163 do not support DVD media.

2) If adding HDDs to SHR-6082, 6162 & 6164

Loosen the screws (x4) in the left/right and upper 
sides to remove the upper bracket and loosen the 
lower screws (x2) to remove the lower bracket.

5.

6.

2.

Upper Bracket

Lower 
Bracket

Upper Bracket

Lower Bracket

Summary of Contents for SHR-6080



























































































































Reviews:

No comments