manualshive.com logo in svg

Samsung SHR-2042, User Manual, Page: 75 / 188

Share
Download
Samsung SHR-2042 User Manual Download Page 75

5-24

●

Sensitivity

Sets the sensitivity of motion detection. Sensitivity grade consists of Low 

➝

Medium 

➝

Very

High in the ascending order.

●

Alarm-Out

Sets the Alarm-Out when Motion occurs.

5 Alarm Outs are supported. 

Select an alarm-out that you want to synchronize with the current motion channel. 

Multi-selection is possible.

●

Beep-Out

Sets the Alarm-Out Duration. Alarm-Out continues for the determined duration.

Off/ 3sec/ 5sec/ 10sec/ 20sec/ 30sec

Video Loss Detection Setup

●

Video Loss State

Off : Video Loss does not operate.

On : Video Loss operates.

●

Alarm-Out

Selects the Alarm-Out when the current Video Loss occurs.

3 Alarm Outs are supported in the present. Select an alarm-out that you want to 

synchronize with the current motion channel. Multi-selection is possible.

●

Beep-Out

Sets Alarm-Out Duration. Alarm-Out continues for the determined duration.

Off/ 3sec/ 5sec/ 10sec/ 20sec/ 30sec

SHR-2040/2041/2042-ENG-1  2005.6.29  4:59 PM  Page 5-24

Summary of Contents for SHR-2042





























































































































































































Reviews:

No comments