Samsung SHR-2042 Page 65 User Manual Download

Page: 65 / 188

5-14

PTZ Device

●

It is an ID for PTZ Camera and available to set from 0 to 255.

●

Protocol

It is supported by the PTZ device.

The following protocols are now being supported.

Samsung/ Vicon/ Panasonic/ AD/ Philips/ Erna/ PelcoD/ PelcoP/Vcltp/ Diamond/ Kalatel

●

Baurate

Baurate is supported by the PTZ device. 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400

●

Parity

It is set to the one of None, Even, and Odd.

●

Data

It is set to either 7 or 8.

●

Stop

It is set to either 1 or 2.

●

Duplex

It is set to either Half Duplex or Full Duplex.

Caution

The above items shall be same to the PTZ device setup.
For the details, please refer to User Manual of the PTZ device manufacturer.

SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-14

Summary of Contents for SHR-2042





























































































































































































Search results

Summary of Contents for SHR-2042

Reviews:

Related manuals for SHR-2042

Brands by name

Popular brands

Samsung SHR-2042, User Manual

Search results

Summary of Contents for SHR-2042

Reviews:

Related manuals for SHR-2042

Brands by name

Popular brands