manualshive.com logo in svg

Samsung SHR-2042, User Manual, Page: 46 / 188

Share
Download
Samsung SHR-2042 User Manual Download Page 46

3

Live Channel Selection and Audio On/Off Setup

In other split modes than Full Screen Mode and Auto Sequence Mode, you can choose a channel
to be displayed in each split area on your own. In addition, the channel being set to Audio On can
be set to Audio On/Off in all Live Modes.

Audio On/Off Setup in the Full Screen

In the Full Screen Mode, the selected channel Audio is automatically turned on and you can set
up Audio On/Off with toggling the channel button.  Depending on the Audio On/Off setup 
condition, the Audio icon of the channel changes to the Yellow/white color.

Audio On/Off Setup in the 4 Split Mode

If you press [ENTER] Button in the 4 Split Mode, the selection cursor in the following figure
will appear and the channel concerned will be selected. If you press the Audio button in the status
of being selected a channel, you can set Audio On/Off for the channel concerned. Depending on
the Audio On/Off setup condition, the Audio icon of the channel changes to the Yellow/white color.

SHR-2040/2041/2042 USER’S MANUAL

4-5

Channel Selection and Audio On/Off Setup in the PIP Mode

As in the 4 Split Mode, if you press [ENTER] button in the PIP Mode, the selection cursor appears
and the concerned channel is selected. With being selected a channel, you can select a channel
on the current screen by the [CH1 ~ CH4] button and set Audio On/Off by the Audio button as in
the 4 Split Mode. Depending on the Audio On/Off setup condition, the Audio icon of the channel
changes to the Yellow/white color.

CAM_03

CAM_04

CAM_01

CAM_02

Note

Note

Audio On/Off of 4 split mode cannot be set in the playback screen.

SHR-2040/2041/2042-ENG-1  2005.6.29  4:58 PM  Page 4-5

Summary of Contents for SHR-2042





























































































































































































Reviews:

No comments