Samsung SHR-2042 User Manual Download Page 158

Page: 158 / 188

SHR-2040/2041/2042 USER’S MANUAL

9-47

●

Sequence Time

- When connecting with SHR-2040/2041/2042 in the monitoring mode, set the

auto sequence time if the auto sequence is set. The time can be set from 10 to

20 minutes.

●

OSD Display

- Sets if OSD shall be displayed on each channel of Smart Viewer.

- Whether you check “Enable” or not, OSD will appear or not.

However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not

be affected by the OSD condition.

●

Callback Connection

- Sets the port for Callback connection.

●

Auto Connection

- Sets if the smart viewer is automatically connected to SHR-2040/2041/2042 or

site at the initial operation.

- If you check “Auto Connection On”, the names of SHR-2040/2041/2042 and Site

currently registered at the DVR/Site list will be displayed in the following list. If

you select one from the list, the smart viewer will connect to the selected

SHR-2040/2041/2042 or Site when it operates later.

●

Language

- Sets the language used in the SmartViewer.

SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-47

Summary of Contents for SHR-2042





























































































































































































Search results

Summary of Contents for SHR-2042

Reviews:

Samsung SHR-2042, User Manual, Page: 158 / 188

Search results

Summary of Contents for SHR-2042

Reviews: