Samsung SHC-721N, Instruction Manual, Page: 3 / 24

COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 5 4
Features Warning
Wide Dynamic Range(WDR)
Fine Picture Condition Under Very
Low Illumination (Sense up)
1/3 high density CCD and digital
processor permit high quality pictures to
be captured in very low light condition.
SV-II DSP chip built-in SAMSUNG TECHWIN
allows the camera to find the best picture
conditions in any environment and
automatically gives a necessary light level
compensation, so you can always obtain
the clear picture, the finest detail and
perfect light contrast.
Motion Detection
The camera transmits an alert signal to
the REMOTE jack when it detects motion
of an object. If you connect an optional
alarm to the camera, you can get the
effective surveillance.
VIDEO/DC Lens Selectable
The camera accepts 2 types of auto iris
lenses (DC type/VIDEO type) and is set
with the VIDEO/DC selection switch.
Electronic Iris
The electronic iris shutter is automatically
controlled at the speed of
1/60~1/200,000sec (NTSC Models),
1/50~1/200,000sec (PAL Models)
Controlled by OSD menu and
RS-232C
You can control the camera using OSD
menu and RS-232C jack at a remote
place.
High Resolution
The horizontal resolution of 500TV lines
at Color mode and 550TV lines at BW
mode can be achieved by using a high
density CCD having Double Speed
410,000 pixels SONY CCD, which provides
clean, noiseless and reliable pictures.
Day & Night
The camera provides automatic mode
changeover by sensing day or night
conditions. It can change color mode in
the day condition for optimal color and
BW mode in night condition for clear
identification.
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time, a
fire may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.