A
Connecting with nFC function - For Android
You can connect the M7 to Bluetooth devices easily by gently touch the smart device to the
mark on the top panel of the M7.
Connect your NFC compatible device to enjoy music with high quality stereo sound, all without
wires.
1
Plug the M7 into an electrical outlet.
2
Turn on the NFC function on your Smart device, and then gently touch the device to the
mark on the top panel of the M7.
3
The Bluetooth screen appears on your Smart device.
4
Select
oK
.
5
Select the desired track to play from your smart device's music list.
6
The M7 plays the track you selected.
notes
9
To disconnect the Bluetooth connection, gently touch the smart device to the mark on the top
panel of the M7 again.
9
Please be careful not to disturb other buttons around the NFC tag.
9
Do not place or play back your NFC device on top of the NFC tag on the M7. Vibrations from the
music may cause the device to tip over and cause the M7 to disconnect or damage the device.
9
The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.
9
The position of the NFC antenna differs on different devices. Check where the NFC antenna is before
connecting.
9
If your device is covered with a thick case, the connection may not succeed.
9
The mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in
other countries.
9
If you unplug the M7, the NFC connection is terminated. To re-establish the connection, plug the M7
into an outlet, and then set the NFC connection again.
9
Tagging the NFC label while the App has not been installed;it guides to the web page for installing the App.
9
If tagged, the NFC label with the App installed, the App runs automatically.
VOLUME
Connect
Smart device
37
4444
