![background image](http://html.mh-extra.com/html/samsung/sgh-z720/sgh-z720_service-manual_1191365029.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-14
This Document can not be used without Samsung's authorization
Screwing the screw
1.Screw the upper 2 point of the SLIDE LOWER
using SCREW Assmebly JIG
→
SCREW
SIZE:1.4*4.0*2.5
2.Screw the lower 2 point of the SLIDE LOWER
using SCREW Assmebly JIG
→
SCREW
SIZW:1.4*2.3*2.5
Screw Cap Insertion
1.Insert Left SCREW CAP.
2.Insert Right SCREW CAP.
3.Press the SCREW CAP with Screw Cap JIG
GUIDE PIN
MICRO SD CARD
COVER
EAR PHONE
COVER
Placing the Main key pad
1. Check the printed condition of the MAIN
KEYPAD.
2. Place the MAIN KEYPAD. View <Fig. 1>
Shield Can Assembly
- Assemble the Shield Can just like in the picture
above.
※
Be careful not to rumple and tear the Gasket
When assembling
the shield cover.
Place VOLUME KEY, SWITCH KEY
-Place both VOLUME KEY and SWITCH KEY.
VOL KEY BRACKET
-Assemble VOL KEY BRACKET using SCREW JIG
→
SCREW SIZE:1.4*2.3*2.5
※
Be careful to a
ssemble the BRACKET right
position.
Be careful not
to damage FPCB
during assembly
Upper 2POINT
SIZE : 1.4*4.0*2.5
Lower 2POINT
SIZE : 1.4*2.3*2.5
14
Insert Left SCREW CAP
Insert Right SCREW CAP
15
16
17
18
19
Volume key
Switch key
<right position>
<wrong position >
Summary of Contents for SGH-Z720
Page 44: ...8 PCB Diagrams 8 1 Top ...
Page 45: ...PCB Diagrams 8 2 Bottom ...