![background image](http://html.mh-extra.com/html/samsung/sgh-z600/sgh-z600_user-manual_1191356182.webp)
Health and safety information
181
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its
highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit estabilished by the FCC. Tests are
performed in positions and locations(e.g. atthe ear and
worn on the body) as required by the FCC.
The highest SAR values for this model phone as reported to
the FCC are Head: 1.12 W/Kg, Body-worn: 0.447 W/Kg. For
body worn operation, this model phone has been tested
and meets the FCC RF exposure guidelines whenused with
a Samsung accessory designated for this product or when
used with an accessory that contains no metal and that
positions the handset a minimum of 1.5 cm from the body.
Non-compliance with the above restrictions may result in
violation of FCC RF esposure guidelines.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. This site uses the
phone FCC ID number, A3LSGHZ600. Sometimes it may be
necessary to remove the battery pack to find the number.
Once you have the FCC ID number for a particular phone,
follow the instructions on the website and it should provide
values for typical or maximum SAR for a particular phone.
Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.