134
Section 10
䢇
DNS
䢇
DNS1: enter the primary DNS (Domain Name System)
address.
䢇
DNS2: enter the secondary DNS address.
䢇
Bearer: select the bearer to be used for each type of network
address accessed: GPRS or GSM. The remaining options
depend on the Bearer setting.
When the bearer is set to
GPRS
:
䢇
APN: enter the access point name used for the address of the
GPRS network gateway.
䢇
Login ID: enter the User ID required to connect to the GPRS
network.
䢇
Password: enter the password required to connect to the GPRS
network.
When the bearer is set to
GSM
:
䢇
Dial Number: enter the PPP server phone number
䢇
Login ID: enter the PPP server login ID.
䢇
Password: enter the PPP server password.
䢇
Data Call Type: select a data call type: Analog or ISDN.
Note:
The WAP settings may vary depending on the service provider.
Summary of Contents for SGH-x507 Series
