Samsung SGH-X481, Service Manual, Page: 41 / 47

7. SGH-X481 Disassembly and Assembly instructions
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change Without notice
7-1
1) Be care of scratch and molding damage. 1) When we disjoint Rear, be care of scratch and molding damage. 1) When we disjointing a connector and PBA, be care of damage.
1) When we disjoint the Front, be care of body transformation. 1) Be care of scratch.
1) Be care of scratch and molding damage.
1 2 3
4 5 6
1) Make the space between rear
cover and front cover using
assembly stick.
1) At first remove the connector from PBA.
2) And disjoint PBA form front ass'y.
3) Remove the front sheet tape at front ass'y.
1) Remove a screw cap with a pinset.
2) Loosen a screw with driver.
1) Loosen a screw this four point
form Rear.
1) Insert a assembly stick to folder space after pushing
top side with a thumb like a picture.
2) And then widen space with
hand and separate 2 parts.
1) Remove the keypad from front ass'y.
2) And separate the folder ass'y from front by
pushing the hinge.
7-1.Disassembly