![background image](http://html.mh-extra.com/html/samsung/sgh-x160b/sgh-x160b_service-manual_1191222021.webp)
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
6-4
This Document can not be used without Samsung's authorization
1. Set the FRONT HOLE TAPE at the line
2. Set the F-PCB GASKET TAPE
2. Put the KEY PAD
※
caution
1. No scratch
2. The tapes are proper place.
3. key pad does not get loose
1.PUT the PBA after Air Blow
2.Connect LCD CONN
※
caution
1. Take care the components on the board
2. Check the LCD CON is conformed
3. No dust should be inside.
1. Assemble the REAR ASS'Y from the upper Hook
2. Tighten REAR SCREW (4 POINT)
HOLE
※
caution
1. No Scratch.
2. Check there is no gap
5
8
7
6
EMI TAPE
FRONT HOLE TAPE
LCD CONN