SAMSUNG Proprietary-Contents may change without notice
6. Disassembly and Assembly instructions
6-1
This Document can not be used without Samsung's authorization
6-1. Disassembly
ANT
CONTACT
SIDE KEY
EAR JACK
1. loosen the four screws at the rear cover
2. Open the rear cover from the bottom-side hook
※
caution
1. Handle the HOOK with care, and check No
bending the board and front cover
2. MIC RUBBER is the proper place
3. Do not touch antenna contact with fingers
IF COVER
1. Disconnect LCD CONN from the Main Board
2. Take off the main board from the case after
taking out the IF cover
3. Take off the Key pad
※
caution
1. Handle with care LCD CONN itself and dust
FRONT HOLE TAPE
after disassembly
1. Take out the FRONT HOLE TAPE
2. Take off the Hinge with widening the left side
gap with front cover.
3. Carefully take out the LCD FPCB through FRONT
HOLE
※
caution
1. LCD FPCB is easy to break
SCREWCAP/S
CREW
1. Pull up the SCREW CAP with pinset.
2. Loosen the screws from cover(2 POINT)
3. Open the FOLDER UPPER
※
caution
1. Do not Scratch with the JIG to open
2. Handle the HOOK with care, and check No
bending the board and front cover
1
4
3
2