![background image](http://html.mh-extra.com/html/samsung/sgh-u100/sgh-u100_service-manual_1191183011.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-6
This Document can not be used without Samsung's authorization
2-4. Assembly
1
4
3
2
1) Put together the LCD module and the PBA
assembling two connecting points of the LCD in
the red circles with the PBA.
2) Connect the LCD connector.
※
caution
1) Handle the F-PCB with care not to be torn.
1) Assemble the front cover and the PBA ASS'Y.
detached it.
※
caution
1) Handle the key F-PCB with care not to be torn
while assembling.
2) Check the insulation tape attached to the correct
place.
3) As inserting the key F-PCB, make sure its guide
line is placed the right below of the connector
locker.
4) Assemble the MOT/SPK bracket and the front
cover locking left and right sides of them.
1) Attach the MIC rubbers, the LED light block rubbers and
the key pad hold rubbers.
2) Place the MIC on the correct position in the
picture below.
※
caution
1) Handle the mic F-PCB with care not to be torn.
2) Assemble a salient part of the MIC holder
facing outside.
1) Assemble the intenna and the coaxial cable.
2) Attach the intenna ASS'Y to the front cover and
screw 2 bolts.
※
caution
1) Check the coaxial cable assembled properly.
①
②
③
④
⑤
Summary of Contents for SGH-U100
