238
Enabling USB Debugging
USB debugging must be enabled before being able to use the
Development feature.
1.
From the Home screen, press
and then tap
Settings
➔
Developer options
.
2.
In a single motion touch and slide the
Developer options
slider to the right to turn it on.
3.
Tap the
USB debugging
field to verify the feature is
active before connecting your USB cable.
4.
Using an optional PC data cable, connect the
multifunction jack on your device to a PC.
Wi-Fi
About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for certain
types of Wireless Local Area Networks (WLAN). Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be
Open (unsecured) as within most Hot Spots, or Secured
(requiring knowledge of the Router name and password).
Note:
After you complete a connection to an active Wi-Fi
network, the Wi-Fi Calling feature will automatically be
enabled.
Note:
For additional information on WPS Connections, refer to
"WPS Push Button" on page 248
and
"WPS PIN Entry"
on page 248
.