86
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring tone, volume and type for incoming calls or
messages.
• volume for the voice prompt.
• sounds made when your call is connected or
when you press a key.
• mode to which your phone switches when you
press and hold the
key.
Incoming calls
(Menu 3.1)
This option allows you to set up the ringer for
incoming calls.
Note
: If your SIM card supports the ALS feature, you
must select the line you wish to change first.
The following options are available:
Melody
: lets you choose between many different
melodies. Each time you select a melody from the
list, it plays the melody.
Ring volume
: allows you to adjust the ring
volume. Use the Up and Down keys or the Volume
keys on the left side of the phone. The more bars
you see, the louder the volume.
Alert type
: lets you specify how you are informed
of any incoming calls.
Melody: the phone rings using the melody selected
via the
Melody
option. See above.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone first vibrates and
then starts ringing.
Sound Settings
87
Messages
(Menu 3.2)
This option allows you to set up the ringer for
incoming messages.
The following options are available:
Tone
: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
Alert type
: lets you specify how you are informed
of any incoming messages.
Silent: only the text notification appears; the phone
neither rings nor vibrates.
Tone: the phone rings using the tone selected via
the
Tone
option. See above.
Vibration: the phone vibrates but does not ring.
Vibration then tone: the phone first vibrates and
then starts ringing.
Repetition
: allows you to specify how often the
phone informs you of a new message. You can
choose either
Once
or
Periodic
.
Power on/off
(Menu 3.3)
This option allows you to select the melody that the
phone sounds when you switch it on or off.
You can choose either
Basic
or
Cheerful
. To turn
the sound off, select
Off
.