SAMSUNG Proprietary-Contents may change without notice
Main Electrical Parts List
2-4
This Document can not be used without Samsung's authorization
2-3. Assembly
1
3
2
4
1) Disjoint volume-key & pwr-key.
2) Remove the green tape on the connector
of key-pad FPCB.
※
caution
1)
Be careful for crumpling & crack of
key-pad
FPCB.
1) Disjoint the intenna screw of 2 points.
2) Disjoint the key-pad FPCB from connector.
3) Take off the motor from the FRONT plastic
using tweezers and disjoint pwr-key FPCB &
volume key FPCB from the FRONT plastic.
※
caution
1) Be careful for scratch.
2) Be careful for the damage on the WIRE of
Motor
1) Remove RF cover using the pointed tool.
2) Disjoint the REAR Screw of 5 Points.
※
caution
1) Be careful for scratch
1) Disjoint REAR's lockers just like pictures
below.(pic1 & pic 2)
2) Disjoint other lockers too.
※
caution
1) Be careful for scratch
2) Be careful for demage of lockers.
<pic 1>
<pic2>