![background image](http://html.mh-extra.com/html/samsung/sgh-i927r/sgh-i927r_user-manual_1190826132.webp)
124
5.
To make your device visible tap
Visible
to place a checkmark
in the selection box.
•
Making your device visible allows it to be detected by other
devices for pairing and communication.
6.
To set how long your device will remain visible, tap
Visible
time-out
and
tap a time
(
2 Minutes, 5 Minutes, 1 Hour, Never
).
7.
To scan for visible Bluetooth-compatible devices tap
Search
for devices
.
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted
connections between your device and another Bluetooth device.
When you pair devices, they share a passkey, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
To pair your device with another Bluetooth device:
To pair your device with another Bluetooth device:
1.
Verify Bluetooth is active.
2.
From the Bluetooth settings page, tap
Visible
.
Your device must be visible to successfully pair with an
external device.
3.
Tap
Search for devices
. Your device will display a list of
discovered in-range Bluetooth devices.
4.
Tap a device from the list to initiate pairing.
5.
Enter the passkey or PIN code, if needed, and tap
OK
.
6.
The external device will then have to also accept the
connection and enter your device’s PIN code.
Once successfully paired to an external device,
appears within the Status area.
Note:
Due to different specifications and features of other Bluetooth-
compatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible with all
Bluetooth compatible devices.
Note:
Pairing between two Bluetooth devices is a one-time process. Once a
pairing has been created, the devices will continue to recognize their
partnership and exchange information without having to re-enter a
passcode again.
Disconnecting a paired device
Disconnecting a paired device breaks the connection between the
device and your phone, but retains the knowledge of the pairing.
At a later point when you wish to reconnect the device, there is no
need to setup the connection information again.