![background image](http://html.mh-extra.com/html/samsung/sgh-i927r/sgh-i927r_user-manual_1190826108.webp)
100
2.
Tap
Haptic feedback
. A check mark displayed next to the
feature indicates Haptic feedback is active.
Display Settings
In this menu, you can change various settings for the display, such
as the font, orientation, pop-up notifications, puzzle lock feature,
animation, brightness, screen timeout, and power saving mode.
䊳
From the Home screen, tap
Settings
Display
.
The following options display:
• Screen display
: allows you to set the Font style, the home screen
and lock screen wallpapers, and the clock position for the lock
screen.
• Brightness
: configures the LCD Brightness levels. Enable
Automatic brightness
to allow the phone to self-adjust or
manually select a brightness level by moving the slider, then
tap
OK
.
• Auto-rotate screen
: when enabled, the phone automatically
switches between portrait and landscape orientation when the
phone is turned. When this setting is disabled, the phone displays
in portrait mode only.
• Animation
: determines whether any window elements animate.
Selections are: No animations, Some animations, or All
animations.
• Screen timeout
: adjusts the delay time before the screen
automatically turns off when inactive. Selections are: 15 seconds,
30 seconds, 1 minute, 2 minutes, and 10 minutes.
• Touch key light duration
: allows you to set the time that the touch
keys located on the bottom of your phone are lit.
• Auto adjust screen power
: allows you to save power because the
phone analyzes the displayed screen image and adjusts the LCD
brightness.
• Horizontal calibration
: allows you to horizontally calibrate your
display using the accelerometer. Place your device on a level
surface and tap
Calibrate
.
Power Saving Mode
This feature allows you set the phone to automatically switch to
power saving mode when the battery is low and configure
additional power saving options.
1.
From the Home screen, tap
Settings
Power
saving mode
.
2.
Tap Use Power saving mode. A check mark is displayed at
the right side and
in the status bar indicate active
status.
To adjust power saving mode:
1.
Activate power saving mode (see above).