![background image](http://html.mh-extra.com/html/samsung/sgh-i750-series/sgh-i750-series_service-manual_1190803082.webp)
Exploded and assembling View
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change Without notice
8-4
1)
SILK line agreement confirm certainly.
1) After insert FPCB to connect and attach TAPE, Press CONNECTOR
equally.
1) After combine SLIDE LOWER, move HINGE up and down and confirm
active state of HINGE.
1) Be careful a damage of connector.
2) Press equally actuator.
3) Silk line agreement confirm certainly.
8
9
10
11
12
1)
Arrange SPEAKER WIRE lest should be chewed and assemble SPEAKER
BRACKET .
2) Screw 2 points marked in red circle.
1) After remove the whiter paper with tweezers, Insert FPCB to
connector.
2) SILK line agreement confirm certainly
.
1) Attach insulation TAPE on connector with tweezers.
2)
When folded FPCB , Confirm whether become side by side with
base line
-
Confirm whether become side by side with base line.
7
1)
Screw 4 points marked in red circle.
1)
After insert FPCB to FRONT's FPCB HOLE, Put the FRONT on slide.
2) After screw 6 points sequentially using a screwdrive, combine
3*4 KEY PAD with FRONT structure.
1) After remove white paper, Insert F-PCB to CONNECTOR.
2)
When we insert FPCB, must be FPCB silk and PCB silk at one
and actuator down.
3) Press equally actuator.
Press CONNECTOR equally
Fold here once so
that F
-
PCB may fold
easily.
Base line
that fold F
-
PCB
TAPE
sticking
base line
Press
equally
Actuator.
Comfirm
base line.
Remove white
paper