![background image](http://html.mh-extra.com/html/samsung/sgh-i550/sgh-i550_service-manual_1190767113.webp)
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-9
This Document can not be used without Samsung's authorization
Attach TRACKBALL FPCB.
1.
Remove TRACKBALL FPCB release paper.
2. Insert TRACKBALL FPCB into CONNECTOR and then close the locker of the connector.
3. Attach TRACKBALL FPCB referring to 2 holes of the PBA.(Two holes of the Trackball FPCB should
fit in the holes of the PBA.)
Connector SPEAKER wire to the PBA SPK connector.
1. Connect SPEAKER wire to the PBA SPK connector consi/-. [ (+) red (right), (
-
)
black(left) ]
2. Settle the speaker module on the PBA considering that a salient part of PBA should fit into
the craw of the SPK module.)
3. Push the SPK wires into the gap between SPK CONNECTOR and 3.5pi EARPHONE JACK not to tear
wires.
6
The salient part of
PBA and the craw of
the Speaker module
<Push the SPK wires neatly>
<Assemble SPEAKER CONNECTOR>
<Completed>
<Assemble SPEAKER/PBA>
The craw of
the speaker
module