![background image](http://html1.mh-extra.com/html/samsung/sgh-e800/sgh-e800_manual_4070739013.webp)
Getting started
20
2. Plug the charger into a standard AC wall outlet
The LED on the travel charger indicates the
charging progress by the following colors:
• Red: the battery is being charged.
• Green: the battery is completely charged.
3. When charging is finished, unplug the charger
from the power outlet and disconnect it from the
phone by pressing the buttons on both sides of
the connector and pulling the connector out.
Note: You must unplug the charger before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
When this happens, your phone turns off the
backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching on or off the phone
1. Press and hold the
key until the phone
switches on.
Getting started
21
2. If the phone asks you to enter a password, enter
a password and press the key or OK soft key.
The password is preset to “00000000” at the
factory. For further details, see page 178.
3. If the phone asks for a PIN, enter the PIN and
press the key or OK soft key. For further
details, see page 179.
The phone searches for your network and, after
finding it, the idle screen appears on the display.
Now, you can make or receive calls.
Note: The display language is preset to English at
the factory. To change the language, use
the Language menu (Menu 9.5). For
further details, see page 169.
4. When you wish to switch off the phone, press
and hold the
key until the power-off image
displays.
Using the keypad lock feature
You can push the slider up to use the number
keypad and back down to make the phone compact.
When you push the slider down back in place, the
display turns off and the phone automatically locks
the keypad to keep it from being pressed
accidentally.
When you press and hold down the Left soft key or
one of the Volume keys on the left side of the
phone, the display turns on. To unlock the keypad,
press the Unlock soft key and then press the OK
soft key. The keypad is activated and you can use
the phone’s functions.
Summary of Contents for SGH-E800
Page 2: ...3...
Page 103: ...Glossary 198...