![background image](http://html.mh-extra.com/html/samsung/sgh-e740s/sgh-e740s_service-manual_1190620023.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-9
This Document can not be used without Samsung's authorization
1) Make sure that key FPCB and connector are assembled
well.
2) Use a cruciform screwdriver.
1) Make sure that you can distinguish between top
-
bottom and middle screws. Top and bottom screws are
identical. But middle screws are different from them.
2) Use a cruciform screwdriver.
1) Be careful of not scratching on a rear cover and a rear.
9
10
11
1) Insert key FPCB into the connector of
main PBA.
2) Tighten a screw at the bottom of main PBA.
1) Tighten 4 screws at the top and bottom
of rear.
2) Tighten 2 screws in the middle of rear.
1) Insert rear cover hook into rear hole.(1)
2) Press hooks from the right side of phone to the left side of that.(2)
2)
Tighten a screw.
1)Insert FPCB into
the connector.
①
②
③
Summary of Contents for SGH-E740S
Page 35: ...8 PCB Diagrams 8 1 Top ...
Page 36: ...PCB Diagrams 8 2 Bottom ...